JIB 18' Jony Jib With Extras
- 2950.00 £
- Published date: June 27, 2024
-
- Goring, Wiltshire, United Kingdom
JIB 18' Jony Jib With Extras
⭕ Clean cosmetic condition. It is separated into nine Pelican cases. The first case is the Kessler K-Pod Tripod. It has a newly mounted Matthews 4-axis leveling head with Mitchell mount. This can be switched back to the original 100mm bowl mount, if preferred. It has the standard pad feet that can be switched out for the locking pneumatic air tires or locking standard caster wheels. Also, in the first case is a c-stand and small tripod stand, both each with a Jony cradle for use to assemble and rest. The second case is the 18 JonyJib, which consists of five-4 foot sections, the yoke with a Mitchell mount, and IDX battery mount as well as the camera platform and brake. The jib heights refer to the maximum level of the camera platform with NO head. The Third Case has the Varizoom VZ-MC100 motorized head with controller. Currently, it has loomed into the head one HDMI, one BNC, the motorized head control cable, and two Redrock microRemote control cables. The are 5 included IDX batteries (with additional IDX battery) will power the motorized head via the IDX battery plate on the yoke and the monitor has its own built in IDX mount on its back. This allows for the head and monitor to be powered separately, however, they both can be powered with the yoke gallery plate using supplied cables. Depending on use, you can get between 3-4 hours of control and monitor power per IDX battery. This allows for the jib to be completely power independent. However, there are power adapters included for both the head and monitor if you wish to run house power (extension cables). There are two (2) Redrock microRemotes ENG Kits. These are some of the first ones on the market and are wired and wireless. The sets include two microRemote Torque Motors, two microRemote Fingerwheels, two microRemote Basestations, and cable kit for both sets. These could be used in a ENG setup, as well. Included is a lamented microRemote instruction manual I created. I have assembled a 15mm mounted cheese plate that has an IDX battery mount with multiple power outputs, d-tap and barrel ports, that allows for ease of use with a variety of cameras. Also included is second IDX dual battery charger and one more IDX battery, making the total 5. There are also several spare items included:
JonyJib Rear Control Frame
Kessler K-Pod Pneumatic All Terrain Wheels
Replacement 20 Pan and Tilt Extension Cord
Replacement Y-Cable for MC100
JonyJib Power Distribution Box
JonyJib Pin and Ring Assembly - 12 qty
SPARE Redrock Wired Fingerwheel Cable - 1 qty
JonyJib2 100mm Mounting Hub (Original Yoke)
Sand Bag - 5 lb
Sand Bag - 10 lb - 5 qty
Sand Bag - 20 lb - 4 qty
Also included, the MultiCart 8-in-1 Equipment Transporter R2 Micro and both the shelf and deck, for aid in transporting weights.
Lastly, I built a dolly using the K-Pods optional dolly wheels (bought an extra for 4) that the K-Pod actually fastens to it with knobs. I also incorporated the K-Pods pull handle to the dolly, which can also be attached to the K-Pods leg. Other accessories for the K-Pod are the 100mm low-boy mount, which allows a 100mm head to be mounted on a K-Pod leg, and the operator seat, which allows a person to ride on the K-Pod if using the K-Pod as a tripod only. The jib at full length can handle 30 pounds. Delivery available.
JonyJib Rear Control Frame
Kessler K-Pod Pneumatic All Terrain Wheels
Replacement 20 Pan and Tilt Extension Cord
Replacement Y-Cable for MC100
JonyJib Power Distribution Box
JonyJib Pin and Ring Assembly - 12 qty
SPARE Redrock Wired Fingerwheel Cable - 1 qty
JonyJib2 100mm Mounting Hub (Original Yoke)
Sand Bag - 5 lb
Sand Bag - 10 lb - 5 qty
Sand Bag - 20 lb - 4 qty
Also included, the MultiCart 8-in-1 Equipment Transporter R2 Micro and both the shelf and deck, for aid in transporting weights.
Lastly, I built a dolly using the K-Pods optional dolly wheels (bought an extra for 4) that the K-Pod actually fastens to it with knobs. I also incorporated the K-Pods pull handle to the dolly, which can also be attached to the K-Pods leg. Other accessories for the K-Pod are the 100mm low-boy mount, which allows a 100mm head to be mounted on a K-Pod leg, and the operator seat, which allows a person to ride on the K-Pod if using the K-Pod as a tripod only. The jib at full length can handle 30 pounds. Delivery available.
Phone number ✆ 01373 924824
Goring, Wiltshire
Related listings
-
Loads Of Wask Equipment - Business/comme...
BUSINESS Limpley Stoke (Somerset) July 1, 2024 3500.00 £ -
ROTAX 912 ULS 100 HP AIRCRAFT ENGINE
BUSINESS Husbands Bosworth (Leicestershire) July 1, 2024 2500.00 £ -
-
-
Prochem Performer Bear Catalytic Carpet ...
BUSINESS Ullesthorpe (Leicestershire) June 30, 2024 2400.00 £ -
-
-
-
Nidek GYC-2000 Green 532nm Laser With SL...
BUSINESS Benington (Hertfordshire) June 30, 2024 3200.00 £
-
Green Mech Arborist 150 Wood Chipper Tur...
BUSINESS Barnoldswick (Lancashire) June 30, 2024 3200.00 £ -
Rockwell Mill Milling Machine Vertical H...
BUSINESS Blockley (Gloucestershire) June 30, 2024 2500.00 £ -
-
-
-
Kwik Way 092 Cylinder Hone - Business/co...
BUSINESS Buckland (Gloucestershire) June 30, 2024 2600.00 £
-
DigiTrak Mark V 5 Directional Locating D...
BUSINESS Bridlington (East Yorkshire) June 30, 2024 1600.00 £ -
-
-
-
3x Philips LHH2000 & Remote Pad Emt Klan...
BUSINESS Flamborough Head (East Yorkshire) June 30, 2024 2800.00 £ -
-
Tyco SEP 3T Connector Shuttle Press 3 To...
BUSINESS Wooler (Northumberland) June 30, 2024 6000.00 £ -
-
-
Archway Competitor -- Soil Sampling Dril...
BUSINESS Boothstown (Manchester) June 29, 2024 6500.00 £ -
-
-
2013 Bel 9X9 DFR Wood Chipper Machine Ya...
BUSINESS Washington (Tyne y Wear) June 29, 2024 3200.00 £ -
1206 YEAR MODEL 1967 FARMALL TRACTOR/GOO...
BUSINESS Welford On Avon (Warwickshire) June 29, 2024 2800.00 £ -
-
-
MKS PVS-6 Portable Vacuum Calibration Sy...
BUSINESS Sapperton (Lincolnshire) June 28, 2024 2600.00 £ -
-
Gerber Coburn Eclipse TW Surface Blocker...
BUSINESS Bredwardine (Herefordshire) June 28, 2024 2350.00 £ -
-
-
-
-
Spanish Nougat And Sweet By Ana Sirvent
BUSINESS Bolton Abbey (North Yorkshire) June 28, 2024 8.00 £
-
-
IGNATURE ENGRAVING SYSTEM MACHINE 8080 P...
BUSINESS Steventon (Oxfordshire) June 28, 2024 3200.00 £ -
-
-
-
Dustless Blaster DB225 Like Sand Shot Me...
BUSINESS Norton Canes (Staffordshire) June 28, 2024 2400.00 £
-
-
-
Opico Mini Loader Skidsteer Tractor Digg...
BUSINESS Eastbourne (East Sussex) June 28, 2024 1800.00 £
-
Weldlogic AWS 150 Lathe Welding System C...
BUSINESS Tewkesbury (Gloucestershire) June 28, 2024 5100.00 £ -
-