EZ50 Stringing Gun - Cable Feeding Tool
- 1.00 £
- Published date: May 17, 2024
-
- Nottingham, Nottinghamshire, United Kingdom
EZ50 Stringing Gun - Cable Feeding Tool
⭕ The Stringing Gun EZ50 by Zeitler is used to feed a special pull line promptly and efficiently into conduits of Ø 18 to 50 mm (internal diameter) for electrical installation in private construction.
Easy to apply even in buckled conduits, junction boxes, sockets and plugs.
The simple way to blow or suck pull line.
Facts
• Blow or suck pull line without compressor
• For all commercial pipe work
(internal diameter from 18 to 50 mm)
• Appropriate for flexible conduits
• Installations in the range of private,
office and industrial buildings
• Huge time saving in cable feeding
• Feeding of several hundred meters
• Lightweight and compact
• Excellent accessibility, even in confined spaces
• Easy to handle
• Double function (blowing and suction mode)
• Perfect and strong to solve pull line
feeding problems
• Suitable in any car boot
• Perfect value for money
Zeitler AG
Stringing Guns and Cable feeding Tools
Sonnhalde 7
CH-6206 Neuenkirch/Switzerland
Tel. +41 (0)41 467 16 14
Fax +41 (0)41 467 20 35
www.zeitler.ch
Stringing Gun EZ50
for all electrical installations
Intended Use:
• insert a special pull line in all commercial conduits (int. ø 18 to 50 mm)
• installations in the range of private houses, office and industrial buildings
• for all commercial boxes, junction boxes, sockets, lamp boxes etc.
(even in very confined spaces)
• problems with f.e. kinked conduits can be solved by switching to suction mode,
sucking the pull line from opposite end
Function:
• apply line brake
• fit joint/nozzle appropriate to internal conduit diameter
• firstly blow through the conduit with air, check if penetrable tube/correct tube
• make either a loop or fix a bead to the pull line
• release line brake
• blow pull line in without interrupting, observe uncoiling in cylinder
• release switch and close nozzle with a finger
• apply line brake and cut off pull line
• fix wire/s to the pull line and start pulling
Stringing Gun EZ50
Standard equipment in strong plastic case
• 1 Stringing Gun EZ50
• 2 pull line rolls ø 1 mm, approx. 900 m, tensile strength approx. 24 kg
• 1 suction device
• Components set A: 2 joints ½, reduction 19/12 mm and nozzle int. ø 9,5 mm
• Components set B: 3 joints ¾, nozzle int. ø 16 mm plus nozzle int. ø 19 mm
• 1 special nozzle black, for internal diameter from 25 to 50 mm
• 1 special nozzle with 90° angle, external diameter 12 mm
(only in connection with special nozzle black)
• 3 beads of ø 11, 13 and 16 mm each
• Operating instructions
https://www.youtube.com/watch?v=dRyEW355ZHk
Easy to apply even in buckled conduits, junction boxes, sockets and plugs.
The simple way to blow or suck pull line.
Facts
• Blow or suck pull line without compressor
• For all commercial pipe work
(internal diameter from 18 to 50 mm)
• Appropriate for flexible conduits
• Installations in the range of private,
office and industrial buildings
• Huge time saving in cable feeding
• Feeding of several hundred meters
• Lightweight and compact
• Excellent accessibility, even in confined spaces
• Easy to handle
• Double function (blowing and suction mode)
• Perfect and strong to solve pull line
feeding problems
• Suitable in any car boot
• Perfect value for money
Zeitler AG
Stringing Guns and Cable feeding Tools
Sonnhalde 7
CH-6206 Neuenkirch/Switzerland
Tel. +41 (0)41 467 16 14
Fax +41 (0)41 467 20 35
www.zeitler.ch
Stringing Gun EZ50
for all electrical installations
Intended Use:
• insert a special pull line in all commercial conduits (int. ø 18 to 50 mm)
• installations in the range of private houses, office and industrial buildings
• for all commercial boxes, junction boxes, sockets, lamp boxes etc.
(even in very confined spaces)
• problems with f.e. kinked conduits can be solved by switching to suction mode,
sucking the pull line from opposite end
Function:
• apply line brake
• fit joint/nozzle appropriate to internal conduit diameter
• firstly blow through the conduit with air, check if penetrable tube/correct tube
• make either a loop or fix a bead to the pull line
• release line brake
• blow pull line in without interrupting, observe uncoiling in cylinder
• release switch and close nozzle with a finger
• apply line brake and cut off pull line
• fix wire/s to the pull line and start pulling
Stringing Gun EZ50
Standard equipment in strong plastic case
• 1 Stringing Gun EZ50
• 2 pull line rolls ø 1 mm, approx. 900 m, tensile strength approx. 24 kg
• 1 suction device
• Components set A: 2 joints ½, reduction 19/12 mm and nozzle int. ø 9,5 mm
• Components set B: 3 joints ¾, nozzle int. ø 16 mm plus nozzle int. ø 19 mm
• 1 special nozzle black, for internal diameter from 25 to 50 mm
• 1 special nozzle with 90° angle, external diameter 12 mm
(only in connection with special nozzle black)
• 3 beads of ø 11, 13 and 16 mm each
• Operating instructions
https://www.youtube.com/watch?v=dRyEW355ZHk
Phone number ✆ 07727 433655
Nottingham, Nottinghamshire
Related listings
-
-
-
Konica Minolta Vivid 9i Non Contact 3D D...
TOOLS Rotherham (South Yorkshire) June 15, 2024 2450.00 £
-
Raman Spectrometer First Defender Thermo...
TOOLS Hipperholme (West Yorkshire) June 15, 2024 2600.00 £ -
-
-
FORMAT-4 FELDER Kappa 450 Circular Panel...
TOOLS Upton Upon Severn (Worcestershire) June 14, 2024 3500.00 £ -
-
PRECISION OPEN FACE FLAT LAPPING MACHINE
TOOLS Sutton Coldfield (West Midlands) June 14, 2024 1950.00 £
-
Cadwell Sierra Wave 4 Channel EMG NCV EP
TOOLS Heckmondwike (West Yorkshire) June 13, 2024 2300.00 £ -
-
-
-
Thermo Scientific ALPS-3000 Microplate S...
TOOLS Kings Sutton (Northamptonshire) June 13, 2024 3200.00 £ -
-
-
-
Mac Tools Macsimizer MB1900A Triple Bank...
TOOLS Hucknall (Nottinghamshire) June 13, 2024 2700.00 £
-
FELDER F700 Z Tilting Spindle Moulder
TOOLS Coln St Aldwyns (Gloucestershire) June 13, 2024 2800.00 £ -
-
-
-
-
Everest VIT GE VideoProbe Videoscope PXL...
TOOLS Herstmonceux (East Sussex) June 12, 2024 3500.00 £
-
-
-
Rohde Schwarz SMU200A Signal Generator 3...
TOOLS Great Singleton (Lancashire) June 12, 2024 3000.00 £