|
Street End TOOLS
Olympus MX61L Inspection Microscope ⭕ Olympus MX61L Inspection Microscope Under 3 years old Olympus MX61L Microscope Stand Olympus U-AN360-3 Rotatable Analyser Olympus U-PO3 Polarizer Slider Olympus U-DICR DIC Slider Olympus U-25LBD Filter Nosepiece with 5 Olympus UIS2 Objectives: LMPlanFL N 100x/0....
|
|
Etchingham TOOLS
HAAG-STREIT SLIT LAMP MODEL 900 And Tonometer ⭕ HAAG-STREIT SLIT LAMP MODEL 900 and tonometer Brand: HAAG STREIT Model: 900 HAAG STREIT SLIT LAMP MODEL 900 TONOMETER Approx. 16 months old. Cosmetically in like new condition, with no marks, no scratches, no dents. Fully working condition Actual unit ...
|
|
Holmbury St Mary TOOLS
Bausch Lomb Orbscan II Topographer System ⭕ Bausch and Lomb Orbscan II Topographer with 3.12 Z Software .Less than 4 years old. The most popular Topographer out there and has been the Gold Standard for some time. Includes 3.12 Z Software (same software on Orbscan IIz), fully serviced, tested and in ...
|
|
Teesside TOOLS
Combination Felder BF 6-31 ⭕ Combination machine Felder BF 6-31 - planing width 310mm - Felder System planer knife - sliding table 1300mm - saw pivotal - Shaper tilts - feeder. In clean condition, good working order and transport can be available. Phone number ✆ 01723 245305 Teesside, North Yorkshir...
|
|
Plymouth TOOLS
ADE Series 350 351 Arm Controller ⭕ ADE Series 350 351 Arm Controller + Robot 351-0494 + CON-0805 + Cable Excellent cosmetic condition, Perfect working order Available for shipping Phone number ✆ 01752 409630 Plymouth, Devon
|
|
Attleborough TOOLS
JDSU ONT-506 40 43GB Tester ⭕ JDSU ONT-506 / 40/43GB Optical Network Tester Available for shipping. With cards: Base Module 40/43G 3061.50.56 + 3061/914.51 CLK-SUM 3061/90.85+3062/.01 2 X Payload Module 40/43G 3061/50.50 Phone number ✆ 01789 485282 Attleborough, Warwickshire
|
|
Uffington TOOLS
NEW Lumenis Lightsheer Duet 810nm Diode Laser Heads ⭕ BEAUTIFUL PAIR OF BRAND NEW Lumeins LIghtsheer Duet 810nm Diode Laser hand-pieces. Both HS and ET hand-pieces shown above are included in this sale. These accessories are NEW and have never been used. Comes with 30 day return policy if not happy ...
|
|
Romney Marsh TOOLS
Brooks Automation 162802 Razor Atmospheric Robot ⭕ Brooks Automation 162802 Razor Atmospheric Robot with End-Effectors and Controller Lightly used units in perfect condition. Cables and attachment plate shown in pictures included. Robot mounts to tool with attachment plate shown in last 2 pictures. ...
|
|
Richmond Upon Thames TOOLS
VARIAN 940-LC ⭕ Nice Varian 940-LC In Excellent Condition. Comes with a lot of accessories. Equipment purchased in 2012 and seen lightly use. Can assist with delivery. Sale includes 1) 940-LC Main Body 2) 445-LC Scale-up Module 3) 440-LC Fraction Collector with 60 and 128 wells (Tubes included) 4) (...
|
|
Charnock Richard TOOLS
English Wheeling Machine ⭕ Cast Iron English wheeling machine. This is a substantial, heavy piece of kit with a throat of around 36 inches. It is very heavy but if youre interested in it then youll probably know that already. Solid, cast iron construction. It is for forming metal allowing compound c...
|
|
Grassington TOOLS
Storz Autocon II 2 400 SCB ⭕ Storz Autocon II Autocon 2 400 SCB High Frequency Electrosurgical Unit ESU with remaining warranty from manufacturer. This unit is in perfect condition and shipping available plus it comes with 30days return policy. Less than 2 years old. Phone number ✆ 07883 785750 Gras...
|
|
Mudeford TOOLS
FARO Arm Edge Portable CMM 6ft 7axis ⭕ 2012 Faro Edge Arm 6ft 7axis. Fully tested working! Includes Base plate, Qty (1) 6mm probe, and kit, all necessary cables. Ships in Blue Shipping Case. Freshly calibrated September 29 2015. Software including Cam2 and Polyworks. Phone number ✆ 01305 706066 Mude...
|
|
Cleator TOOLS
ADVANCED ENERGY 3152603 E-WAVE POWER SUPPLY ⭕ ADVANCED ENERGY 3152603-012 E-WAVE POWER SUPPLY. NOVELLUS 27-260607-00 POWER SUPPLY LOOKS CLEAN. AVAILABLE FOR COLLECTION/SHIPPING Phone number ✆ 07882 608346 Cleator, Cumbria
|
|
Halesowen TOOLS
Syneron Candela Gentlemax Pro Aesthetic Laser ⭕ 2014 Syneron Candela GentleMax Pro Model No. GentleMAX Pro Serial No. 9914-9035-1203, Date of Manufacture: March 2014, The GentleMax Pro, is the Gold Standard for Laser Hair Removal in all Fitzpatrick skin types. It is a dual wavelength laser platform ...
|
|
Higher Bockhampton TOOLS
BioDot XYZ3050 Platform Dispenser ⭕ BioDot XYZ3050 Platform Dispenser Batch Rapid Test Motorized Stages with LM5000 lam New in 2012 BioDot XYZ3050 System Complete Includes LM5000 Clam Shell Lamination Device BioJet, AirJet Dispenser - complete system Includes Manuals. Phone number ✆ 07624 547604 Hig...
|
|
Saint Sampsons TOOLS
PEDDINGHAUS HYUDRAULIC IRONWORKER ⭕ PEDDINGHAUS HYUDRAULIC UNIVERSAL IRON WORKER MODEL: PEDDIMAX 110/140 CLEAN CONDITION GOOD WORKING ORDER DIMENSIONS 77 X 40 X 81 DELIVERY POSSIBLE. Phone number ✆ 01326 746525 Saint Sampsons, Cornwall
|
|
Cheadle TOOLS
Amada Finebend FBD3512 CNC Pressbrake ⭕ Amada Finebend CNC Pressbrake Model FBD 3512 35 Ton x 1200mm Bending Length Distance between frames 1020mm Throat Depth 200mm Stroke Length 100mm Open Height without tools 370mm Control Amada NC9 - EX Complete with Top and Bottom European style tooling, Sick i...
|
|
Sunbury TOOLS
Sedgwick SM255t Spindle Moulder ⭕ Sedgwick SM255t spindle moulder Good working order. Clean condition. Will consider delivery and can arrange delivery. Phone number ✆ 07553 999330 Sunbury, London
|
|
Droitwich TOOLS
Dancutter Super Flex Robotic Cutter ⭕ Dancutter Superflex Robotic Grinder, Only 7 months old. Used to open covered branch connections or cut stretched liner material during Sewer pipe Relining. Can also be used to grind out offset Clay joints prior to lining. Unit comes with 12 color monitor with jo...
|
|
Glasgow TOOLS
SUNNEN PM-300 Pin Fitting Machine ⭕ I bought this Sunnen PM-300 machine NEW in 2002 and I used it in my small worhshop, works great and is in great condition, it will bore .656-1.181 pin holes, I only did the small end of rods and thats all I have for mandrels ,these are great machines and a must if...
|
|
Wool TOOLS
Wide Belt Sander Buffering ⭕ 2010 Wide belt Sander Buffering 37 inch single head Clean condition and good working condition. Serviced recently and ready for work. Transport or collection available by appointment. Phone number ✆ 01305 334685 Wool, Dorset
|
|
Syston TOOLS
NAKAMURA-TOME TW-10 MULTI-AXIS TURNING CENTER ⭕ NAKAMURA-TOME TW-10 MULTI-AXIS TURNING CENTER WITH LIVE TOOLING Year 2002, Condition: EXCELLENT Delivery can be arranged MAXIMUM SWING OVER BED: 8.27 MAXIMUM TURNING DIAMETER: 8.26 MAXIMUM TURNING LENGTH: 6.10 DISTANCE BETWEEN SPINDLES: 30.12 BAR CAPAC...
|
|
Axbridge TOOLS
TA Instruments TGA Q500 Thermogravimetric Analyzer ⭕ This is a nice TA Instruments TGA Q500 Thermogravimetric Analyzer. Year 2013. This system will be removed from the lab environment in the next couple of days. Tested and it is in perfect working condition. Included with the Q500 is the Heat Exchan...
|
|
Didsbury TOOLS
BROOKS AUTOMATION 201600-11 MAGNATRAN7 ROBOT MAG7 ⭕ BROOKS AUTOMATION 201600-01 MAGNATRAN7 ROBOT MAG7 Manufacturer: BROOKS AUTOMATION Part number: 201600-11 LIKE NEW CONDITIONS TESTED AND FULLY WORKING ORDER SHIPPING AVAILABLE Phone number ✆ 07898 971148 Didsbury, Manchester
|
|
Cheltenham TOOLS
Holzkraft - CU 300 Combination ⭕ Holzkraft - CU 300 K Combination in excellent clean condition, good working order 1 Owner purchased new in 2014 cutting length 2250 mm Height of cut 240mm Motor 3,0 kW Single phase Planer table length 1500 mm Can help with delivery Phone number ✆ 01452 813913 Chelten...
|
|
Wye TOOLS
Section Shear Punch Mubea Muhr Bender KLSH 550 ⭕ Section Shear punch Mubea Muhr und Bender KLSH 550 Good working confition 55 t Punching capacity, holes diameter 30 in 15 mm, 50 mm cutting stroke. Shearing flat bar 200 x 20 mm or 400 x 16 mm, Klink power 75 x 8 mm. Engine power 7.5 kW, total weight ...
|
|
Camelford TOOLS
Haag Streit Interzeag Octopus 311 Direct Projection Perimeter ⭕ Complete Haag Streit Interzeag Octopus 311 Direct Projection Perimeter System in perfect working order and excellent cosmetic shape. Unit is less than 3 years old and comes with 30 days return policy if not happy with the purchase or no...
|
|
Bladon TOOLS
Shimadzu TOC-Vcsh ASI-V Analyzer ⭕ Shimadzu TOC-Vcsh and ASI-V Auto Sampler Total Organic Carbon Analyzer, year 2012, excellent working condition. Phone number ✆ 01865 525877 Bladon, Oxfordshire
|
|
Frizington TOOLS
SAC FS 530 Surface Planer ⭕ SAC FS 530 Surface Planer Year 2009 Excellent clean condition 530mm wide x 2.9m full length of tables Power rise and fall of indeed table 3 Phase 5.5kw motor 5000rpm Weighs 750kg Can arrange delivery Phone number ✆ 07771 138699 Frizington, Cumbria
|
|
Beckenham TOOLS
AEROTECH AMG LP GIMBALL WITH CONTROLLER AEROTECH A3200 SYSTEM ⭕ AEROTECH AMG LP GIMBALL AMG-100LP-AS WITH CONTROLLER AEROTECH A3200 SYSTEM IN PERFECT WORKING ORDER AND EXCELLENT COSMETIC CONDITION. LESS THAN 7 MONTHS OLD. 30 DAYS IS THE RETURN POLICY. COLLECTION OR WILL CONSIDER SHIPPING. Phone numb...
|
|
Greatham TOOLS
NOVA ANALYZER BIOPROFILER 400 FLEX ⭕ NOVA BIOMEDICAL ANALYZER, BIOPROFILER 400 FLEX. One Automated Analyzer for Fast, Comprehensive Cell Culture Analysis. BioProfile is a instrument that measures up to 15 key cell culture attributes. By combining as many as five separate instruments into one easy-to...
|
|
Wroughton TOOLS
Felder F700 Z Tilting Spindle Moulder ⭕ Manufactured 2012 Features: Smooth and comfortable operation when slot and tenoning:X-Roll sliding table Maximum ease of operation with Power Drive: electrical height and angle adjustment Felder spindle quick change system: quick changeover ensuring maximum pr...
|
|
Clacton On Sea TOOLS
Promecam Sheet Metal Hydraulic Guillotine Shear ⭕ Promecam Sheet Metal Hydraulic Guillotine Shear Shearing 3m x 6mm Variable Rake Shear with Power Backstop Complete with: Squaring arm and Support Arms Power Backstop with Mechanical Readout Electric Footswitch Machine works as it should, the blades a...
|
|
Saint Sampsons TOOLS
CALIBRATED MOTOROLA R2670B P25 ⭕ MOTOROLA R2670B P25 Communications System Analyzer PROJECT25 CALIBRATED NOV 2015 PROJECT 25 / ASTRO EXCELLENT COSMETIC CONDITION, PERFECT WORKING ORDERT DELIVERY AN OPTION Phone number ✆ 07866 452652 Saint Sampsons, Cornwall
|
|
Bebington TOOLS
Storz Tele Pack X 200450 20 Video Endoscope ⭕ This all in one unit in excellent cosmetic condition, powers displays and the light source has good working bulb. Unit is under 19 months old. The storz 20262130 DCI II camera works. Everything works as it should. Shipping can be sorted. Accessories with...
|
|
Huddersfield TOOLS
Vitek Biomerieux TEMPO QI Automated Enumeration System ⭕ This is a Vitek Biomerieux TEMPO QI Automated Enumeration System Microbial Food Analyzer. Calibrated, Tested and Checked, powers on, both units pass self tests, in perfect working order and excellent condition. Approx 3 years old. Comes with H...
|
|
South Milford TOOLS
3M True Definition Scanner ⭕ 3M True Definition Dental Scanner with remaining warranty from manufacturer. Unit is approximately 2 years old. In like new cosmetic condition. This is a beautiful system and will be removed from working environment in the next couple of days. Available for delivery. Pho...
|
|
Batley TOOLS
2012 Holzher Dynestic 7516 Cnc Router ⭕ This holzher 2012 dynestic cnc nested based router 7516 is fully loaded and ready to work. It boasts a 12 tool ATC Hsk 63f tool changer. It also has the large drill block with horizontal drilling in both X and y direction. This machine automatically loads the ...
|
|
Belford TOOLS
Hammer Felder C3-31 Combination Machine ⭕ Hammer Felder C3-31 Combination Machine Saw/Planer/Thicknesser/Spindle Moulder Hammer/Felder C3-31 Combination woodworking machine. Fabulous piece of kit, probably the best available of its type New in July 2012 Single phase 1250mm Sliding table 12 310 mm pl...
|
|
Southwick TOOLS
SCM FS520 Thicknesser Planer ⭕ year 2007 working width 510mm Surface planer: 2200mm Max about 220mm thicknesser planer 4 knifes Leitz-Zentrofix 4 feed speeds electric table stroke motor power: 5,5kW Single phase Manuals included Serviced recently and in good working order and condition. Can put on p...
|
